KENKO Kit 2 Extension Tubes 10 / 16mm for CANON RF-Mount

Descriptive :

KENKO Kit 2 Extension Tubes 10 / 16mm for CANON RF-Mount:


Extension tube composed of two rings (10 mm and 16 mm) to take advantage of macro photography with your standard lens.



Composed of two rings of 10 mm and 16 mm respectively, which can be used alone or combined together, this kit of Kenko extension tubes for CANON RF mount is compatible with Canon EOS E and EOS RP systems (RF mount).


Extension tubes are designed to allow a lens to focus closer than the minimum focusing distance.

The tubes are therefore particularly useful in macro photography, allowing you to transform any lens into a macro lens at a lower cost and retaining the original optical quality.

DG extension tubes do not have a lens. They are inserted between the housing and the lens to increase the distance between the latter and the CCD sensor. By increasing this distance, they force the lens to focus much closer than normal.

The thicker the tube, the closer the lens will focus.

Kenko's DG tubes guarantee electronic transmissions between the body and the lens. They can overlap.

•     Tube length: 10 mm and 16 mm
•     Tube diameters: ± 61.5 mm
•     Weight: 73 g (10 mm) - 93 g (16 mm)

Precautions:

•     Extension tubes are not intended for use with mounting adapters or teleconverters. Doing so may damage the camera and the lens.
•          Each ring on the camera is equipped with electrical contacts, allowing connection to both the camera and the lens body.
•          Autofocus operations are possible, but as the depth of focus decreases, it is recommended to switch to manual focus.
•          Use the ring whose width does not exceed the focal length of the lens used. If the width of the ring exceeds the focal length of the lens used, it will be impossible to focus on the object.
•          Due to the shallow depth of field, it is recommended to use manual focus.

Weight : 168.00 g