NUM'AXES - 2K WI-FI SOLAR photo trap

Ref : PIE1060

Available

Descriptive :

NUM'AXES - 2K WI-FI SOLAR photo trap:

The PIE1060 camera trap offers you:

almost unlimited autonomy outdoors thanks to the integrated high-performance solar panel
the ability to make adjustments and download photos and videos remotely using the Wi-Fi function

Features :

The Wi-Fi function allows remotely and thanks to the free application (Android/iOS):

view, download or delete recorded photos and videos
take photos or videos
change product settings
to check the energy level and the remaining memory capacity
The device creates its own Wi-Fi network.
The Wi-Fi function is activated by Bluetooth from a smartphone.
Solar panel with integrated rechargeable lithium battery:
3.7V - 4400mAh
The solar panel battery can be recharged by solar energy or with the supplied USB cable.
The camera first uses power from the solar panel before using power from batteries (if you have one installed).
Field of vision: 80°
PIR sensor (motion/heat detector):
Detection angle: 60°
Detection distance: about 23m
Adjustable detection sensitivity: High | Average | Weak
Infrared flash:
36 invisible LEDS | Wavelength: 940 nm
Flash range: approx. 30 m
Infrared flash with automatic activation depending on brightness
Adjustable infrared flash power: Auto | Average | Low | OFF
Ultra-fast trigger speed: approximately 0.3 seconds
Capture modes:
Photo: 1 to 10 photos per trigger
Video: programmable duration from 5 seconds to 3 minutes
Photo + Video: a photo then a video are taken each time it is triggered
Image sensor: 5 Mega Pixels color CMOS
Photo resolution: 2 MP / 4 MP / 8 MP / 12 MP / 16 MP / 20 MP / 24 MP / 30 MP
Programmable shutter speed: 1/15 | 1/20 | 1/30
Photo file format: JPEG
Video resolution: 368p / 480p / HD 720p / Full HD 1080p / Full HD 1296p / 2K
Frames per second: 30 fps (frames per second)
Programmable audio recording in videos (ON | OFF)
Video file format: MPEG-4
PIR detection mode: the device takes photos and/or videos when the PIR sensor (motion/heat detector) detects activity in the area it covers
Time Lapse mode: photos and/or videos are taken automatically at regular time intervals. In this mode, the PIR sensor is disabled (there is no motion/heat detection).
User programmable operating ranges
Timestamp on photos/videos: date, time, ambient temperature, moon phase, solar panel energy level, camera name
Memory: micro SD card of 256 GB maximum, U1 class 10 minimum (not included). You can obtain micro SD cards at any time on this site.
Night capture in case of low energy level: 2 possible settings
No infrared flash: at night, if the energy level is too low, the device will take photos/videos without triggering the flash.
No capture: at night, if the energy level is too low, the device will no longer take photos or videos. He will only take it during the day.
Programmable device identification number: allows you to identify where and by which device a photo was taken.
Programmable password
Loop recording to programmable memory card: If this setting is set to ON, when the memory card is full, the camera continues recording photos/videos by deleting the oldest files.
Padlock slot on camera body

Reliable and efficient

2 years warranty
Designed to withstand bad weather (IP66)
Trigger speed: approximately 0.3 seconds

Ergonomics:

Weight: 433 g (without batteries) | 525 g (with batteries)
Dimensions: 143 x 107 x 95 mm
Power supply: integrated solar panel and/or 4 AA alkaline batteries or 4 AA Ni-MH rechargeable batteries (not included) - You can obtain these batteries at any time on this website.

Standby time: